The first thing to do would be to hook up a scan tool that can communicate with the Roof door module (RDM) an check for code's (DTC'S) . Can set a bunch of different code's
DTC B1296
DTC B1300
DTC B1306
DTC B1310
DTC B1311
DTC B1323
DTC B1517
DTC B1518
DTC B3602
DTC B3665
DTC B3666
DTC B3667
DTC B3670
DTC B3671
DTC B3674
DTC B3675
DTC B3676
DTC B3677
DTC B3681
DTC B3682
DTC BThe roof door module (RDM) checks the outer latch latched signal circuit, at least once every 200 milliseconds.
The folding top outer latch position switch is supplied with a constant ground source.
When the switch is active, the RDM will detect a switched ground signal on the folding top outer latch position switch latched signal circuit indicating that the latch is latched.
DTC B3685
Without a factory or professional scan tool you can't read these code's . Advance , auto zone , pep boy's etc .... can't read these code's . Your best bet take it to the Dealer or someother qualified repair shop.
Sample of code DTC B1296
The roof door module (RDM) checks the outer latch latched signal circuit, at least once every 200 milliseconds.
The folding top outer latch position switch is supplied with a constant ground source.
When the switch is active, the RDM will detect a switched ground signal on the folding top outer latch position switch latched signal circuit indicating that the latch is latched.
what type of scaner do i need to scan the 2006 ssr for roof troble
×
SOURCE: Where is the battery located
If it is not under the hood then it is under the rear seat. Check the user manual if available.
SOURCE: How to remove door panel on 2004 Chev SSR. Inside
HOW DO YOU REMOVE THE TRIM INSIDE OF A 2004 CHEVY SSR
SOURCE: ROOF ON 2004 SSR WON'T
Roof Cycle Timeout:------------- This message will be displayed on the DIC when the convertible top has not completed its movement from one position to another within the programmed time limit. When this message appears, the convertible top will stop moving. Release the convertible top switch and make sure there is nothing blocking the path of the top. If the path is clear, press the convertible top switch again. When operating the top in low temperatures, such as below 32 degree F (0 degree C), the time needed to cycle the top will increase. This may cause the top movement to stop and the Roof Cycle Timeout message to appear on the DIC display. If this occurs, you may release the convertible top switch and press it again to continue the cycle. Make sure nothing is blocking the path of the top before pressing the switch again. It may be necessary to do this several times to complete the cycle, depending on the outside temperature. ------------ Also click this link for more details:---- http://howtobyme.blogspot.com/2011/08/chevrolet-ssr-roof-will-not-go-down-and.html ------------ This will help.Thanks.Helpmech.
1,310 views
Usually answered in minutes!
×