Need instructions to build artin superspeed way Porsche

http://www.cyberdesignconcepts.com/guenter/pdf/porsche_boxster_owners_manual_2006.pdf


http://translate.google.com

Vous pouvez traduire des parties du manuel en anglais

TRY PORCHE THEM SELVES FOR A MANUAL OR SEE IF YOU CAN GET ONE ON THE INTERNET

Besides a leak on intake I will check the ECU just to make sure that thing is working as it was intended to, a sitting car usually have moisture build up and is not friendly with electronic components.

Check your clutch slave cylinder , or clutch master clutch cylinder see if it has enough fluid , if its empty fill it up and left the pedal back with your hand and pump it manually with your hand Untill it builds pressure , keep checking the fluid , Note this will only get you I a repair shop to replace necessary parts . And please becareful do the while car is rest and e-brake is engaged so car won't roll over . Becareful . Also check the correct fluid for your car . Hope this helps .

go to the instruction manual and see the box fuse, take out the fuse wait for 1 minute, and try again. of course the motor can be off.

God bless you

You can view www.uobd2.com and into UOBD2 technical service or you can ask the customer service.I get the manual of there before.GOOD LUCK!

http://industryfigure.com/berkeley/Porsche/ignitionswitch.htm

does the clutch engage still? or no?

wow, i wouldnt try that man. I did once and failed miserably. you need a second hand to do this but goto www.clarks-garage.com and just select clutch bleeding. Very easy step by step instructions.

Yes www.alldatadiy.com is a great site. Buy a 1 year subsciption for less than 20.00USD it is well worth the money if you are a DIYer