How do i locate the plugs on a 2003 cadillac seville

SOURCE: location of engine and chassis number

There is a flat spot at the front of the right side (passenger side) cylinder head will have the last 6 of the Vin and letter code at the end of it for id purposes. You will see it looking down from the top of the motor.

SOURCE: NEED LOCATION OF THERMOSTAT IN

1. Drain the coolant to a level below the thermostat housing.
2. On some vehicles, access is easier if the front-end beauty panel and the air cleaner are removed.
3. Remove the 2 bolts securing the thermostat housing to the intake manifold.
4. Remove the thermostat housing.
5. Remove the thermostat and O-ring from the housing.

1. Install the thermostat and new O-ring to the housing.
2. Install the thermostat housing to the intake manifold. Tighten the thermostat housing bolts to 18 ft. lbs. (25 Nm).
3. Refill the cooling system using a 50/50 mixture of water and ethylene glycol antifreeze.
4. Install the air cleaner and beauty panel, if removed.
5. Start the engine and check for coolant leaks. Allow the engine to come to normal operating temperature. Recheck for coolant leaks.

Testimonial: "thanks for the great detailed information-greatly appreciated"

SOURCE: where is the flasher module located for the turn

Under the dash on the driver's side, way up inside.

SOURCE: where is the body control module for 1993 cadillac

REMOVE GLOVE BOX,BCM IS MOUNTED ON TOP OF THE HVAC CASE

Johnny Brown

• 5763 Answers
• Posted on Sep 04, 2010

SOURCE: Where is the crankshaft position

For a 1999 seville the crank shaft sensor is located on the leftside of the engine right above the oil preasure switch, heres a diagram to help you locate them, this car has two cranksensors, cranksensor A and cranksensor B. hope this helps.