Ingnition lock removal 2010 ford escape - 2010 Ford Escape

https://www.google.com/search?q=FORD+ESCAPE+PCM+WIRING+FOR+MIDDLE+HARNESS

or take a subscription to www.alldata.com

Fuse 11 is MAF on some years, but not all

https://www.google.com/search?q=FORD+ESCAPE+Fuse+%2311+keeps+blowing

This is the fuse box for 2010, change to your year in the URL and press enter

https://www.startmycar.com/ca/ford/escape/info/fusebox/2010

..

Question edited for clarity.
Question moved to model category.

There are three ways to get the Radio Code.

https://www.fixya.com/support/r29874205-need_vehicle_radio_code

..

I think this is the corrrect one for your Escape.

FOr the best advice, contact Ford customer service directly. Here's the link-

noooooo

pull it off

There is no approved bypass for this.

on my 2010 ford escape XLT i found the keyless entry code printed on a label on the smart junction box which is inside the center console. To get to the smart junction box follow these instructions.
1. with a non-marring tool(i used a putty knike wrapped in plastic wrap), pry up the chrome trim piece around the shifter.
2. Remove the storage tray from underneath the center console armrest and leave the armrest cover open.
3. Grab the center console finish panel near the cupholders and pull straight up.
4. Pull the finish panel up and back then set it aside.
5. The smart junction box is to the right and slightly ahead of the gear shifter. There should be a label with a bar code that says FoMoCo. In the corner of this label is a 5 digit number. This is the factory code.
Hope this helps.

yes it can in the message center, there should be a lenghty section on it in the owners manuel