I tried to answer. Go to BBB Industries for a wiring diagram, then you can see what all is on that circuit or circuits that the fuse protects. Then you can look at each item and the wiring to it for the problem.
SOURCE: horn fuse keeps blowing out
Check the wiring around the horn and make sure nothing is touching metal...look under the hood at the horn and make sure everything is pluged in and there is no water on any plugs or wiring...Make sure the fuse is the correct number (ex: 10, 20, 25) If it is still blowing out the fuse then you after you do some checking then it is a short in some wires
SOURCE: 95 Toyota Camry power window fuse keeps blowing
the window switch is stuck even if you work it with your finger and it doenst feel stuck the brass contactes are welded together on the in side of the switch try a new switch or take the one you have apart ... becarefull thu lots of springs and some sall parts inside
SOURCE: taillights and license plate lights not working
there is a short somewhere.put a test light in place of the fuse.
the light will glow bright.when the short is removed,the light will go dim
SOURCE: No spark, 1988 Toyota Camry 3SFE 4cyl, 5 speed.
there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks
SOURCE: Keeps blowing starter fuse when you turn the key to start engine.
YOU GOT A IGNITION WIRE TO STARTER SHORTING TO GROUND.
749 views
Usually answered in minutes!
×