Manual Transmission and was able to compression start it and runs fine. I had replaced the starter a few years ago and am not against that being the issue would like some advice other things to check before that. stuff that i might beable to see visabliy having an issue and then go from there. I have been told possible fuse as well. any help would be great. thanks
Fix your problem right away, by clicking the link -
https://www.reliable-store.com/products/2003-toyota-matrix-service-repair-manual-download
SOURCE: 1994 Toyota Camry 4 cylinder Starting problems
your starter is bad.... the two contacts inside the solinoid are worn out only way to fix is replace the unit as a whole bet ya you get click click click then my start.. bet my life on this one been fixin toyotas for 20+ years
SOURCE: 95 Geo Prizm Lsi will not start
95 prizms are known for starter problems if they last 2 years you are lucky..They just get way to hot where they are......And are a pain to replace....
SOURCE: Doesn't start- Thought starter was bad replaced
The ignition switch attached to the column is probally bad, check the small wire to the sloenoid for battery when the key is turned to the start postion, if no battery, your not getting power from the ignition switch to the starter solenoid.
SOURCE: 2003 BMW 530i won't start; mechanical hum, but no clicking sound
my 530i are 203 and problem was iwash the car with watter and starting problem no start all light is vuzible
131 views
Usually answered in minutes!
×