Question about 2004 Lincoln Navigator
ADDED A STATER AND WAS TOLD RELAY SWITCH WAS NEEDED
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This is how you do it make sure the trip has the odometer showing, not the Trip A or B.
Reset the system by the following procedure:
1. Turn the ignition key to the “LOCK” position with the
odometer reading shown.
2. Turn the ignition key to the “ON” position while holding down the “ODO/TRIP” button. Hold down the button for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
I have used this in every RX330 i have ever done. will not work if trip a or b is showing though
Posted on Nov 28, 2008
If the clicking sound is coming from the engine bay, from the relay, you may want to have the starter itself checked out. You need to check if the ground cable from the engine to the chassis is secured. If that is OK, you may want to have the starter motor checked.
Posted on Oct 09, 2009
This is caused by a blend door actuator on the rear a/c unit. There are 2 located on the case. Take it to a dealer and they will know what you are talking about.
Posted on Oct 22, 2009
that is in the owners manual, go to the link below and follow that to the Ford site for a free download. the relay center is under the hood.
Posted on Apr 29, 2010
Tips for a great answer:
Mar 14, 2018 | Lincoln Cars & Trucks
Jan 15, 2015 | 1999 Lincoln Navigator
Dec 16, 2013 | 2004 GMC Envoy
Nov 18, 2012 | 2004 Lincoln Navigator
Jun 29, 2011 | 2004 Lincoln Navigator
Mar 03, 2011 | 2004 Lincoln Navigator
Jan 13, 2010 | Lincoln Navigator Cars & Trucks
Aug 23, 2009 | 1998 Lincoln Navigator
Aug 07, 2008 | 1999 Lincoln Navigator
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: