SOURCE: Ambiant air temp reading on dash reads 110 to 122
Ambient Sensor (Auto A/C Model)
REMOVAL
INSTALLATION
Install in the reverse order of removal.
SOURCE: replaced a 03 monte outside temp guage sensor only reads -40 now
If there is nothing else wrong with the system you just need to drive it over 25mph for more than 2 minutes. If you slow down below 25mph then you will have to start over. I would recomend getting on the freeway. Don't go over 60mph though, that will make it reset also. If it still says -40 after you are sure you have met the time and speed criteria. Then there is still a problem in the system. Make sure the connector at the temp sensor is clean and the terminals are good.
Testimonial: "There is no way in the world I would have figured this solution out on my own...Thank You"
SOURCE: ambient temp sensor for dodge
you have to drive the car awhile for it to update the temp.otherwise when you were in traffic stopped it would read what ever temp in front of radiator is
SOURCE: 92 dodge dakota 3.9 4x4 code 23,32 where is the
TESTING
This is a test of the sensor only. A complete test of the circuit requires the DRBII scan tool, or equivalent.
Unplug the wiring harness connector from the intake manifold temperature sensor.
code 32 is related to the EGR circuit. Remove the EGR valve from the intake and check for a clogged port(s). If ports are ok, replace the EGR. Check for vacuum leaks on all hoses and connections as well as the air intake tube. Sometimes the air intake tubes crack in between the ribs on on the ends where the clamps are, causing vacuum leaks.
SOURCE: The outside temp does not read out on the rearview
Its behind the grill, there's 2 wires going to it. It's called an ambient air temperature sensor.
This is what it looks like:
http://images.whisystems.com/smartpages/partinfo_resize/DUS/213-3681.jpg?width=300&height=300
105 views
Usually answered in minutes!
×