2006 Kia Sportage Logo

Related Topics:

Sir i have kia sportage 2006 manuel car when i gose to 2 gear start with jurking after few minu,runing smoothly and same in 3 gear also.

5 Related Answers

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Mar 01, 2009

SOURCE: 2006 sportage timing belt- how to change

Here you go, just ignore part about removing sprockets. Click on pictures for larger view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801bca65

Ad

Anonymous

  • 2 Answers
  • Posted on Mar 31, 2009

SOURCE: Kia Sportage jerking and sputtering

Took it to the Kia dealer they said something was blocked and cleared it.

Anonymous

  • 1 Answer
  • Posted on Oct 26, 2009

SOURCE: Can't get my 1999 Kia Sportage to start

1999 kia sportages are aP>O>S. I know i have one. my suggestion is to burn it

dougbender51

  • 976 Answers
  • Posted on Apr 03, 2010

SOURCE: how to program a remote on 2006 kia sportage

you have to take it to the dealer cant be done at home

dougbender51

  • 976 Answers
  • Posted on May 08, 2010

SOURCE: Kia Sportage 93171K

evap purge valve fault is your p0443
p1693 is manu. controlled aux input output fault
p1693 is a code for an open or short to ground for the check engine light
does it light up when key is on? if so then it is a left over code from some previous repair attemt
the evap code wont prevent starting
check for broken timing belt
check for fuel in tank and that it has proper fuel pressure

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can I flat tow my 2006 Kia Sportage which is automatic transmission with option to push button for Manuel transmission

No you cannot flat tow the sportage for multiple reasons. Alot of times you can avoid ruining your automatic transmission by removing the driveline but this vehicle is a front wheel drive so you cannot do that. The kia sportage must be towed on a trailer or possibly a car dolly.
0helpful
1answer

Location of 02 sensor bank 2 sensor 2 in 2006 Kia Sportage

https://www.youcanic.com/guide/kia-oxygen-sensor-replacement-instructions
1helpful
1answer

Cooling fan starts up when I turn on engine on Kia Sportage 2006

I have two 2006 Kia Sportages and they both do the same. I'm not sure but I think the cooling fan is programmed to start if using a remote starter.
0helpful
2answers

Kia sportage 05 jerking in 2nd and 3rd gear, raving the engine spontaniously, help!

SX 2.4L w/Auto Trans Slip/Jerk Shift Problem - Kia Forum

www.kia-forums.com/kia-forte...td.../55002-sx-2-4l-w-auto-trans.html

Nov 5, 2009 - 10 posts - ‎8 authors
A noticable rev in RPM between 2nd and 3rd gear only after startup. I had been ... Last edited by TeeJay1959; 11-05-2009 at 04:49 PM. TeeJay1959 is ... Started engine, accelerated out of parking lot and got a rude jerk between 2nd and 3rd gear. You are right .... 1 Attachment(s) 93-02 Kia Sportage Mud. 2nd to 3rd gear shift a "jolting" exoerience
10 posts
Jan 30, 2015
Please Help with 2006 Spectra Transmission
10 posts
Jan 31, 2012
2010 Surging while driving
10 posts
Jul 4, 2011
2005 Kia Spectra Auto Trans Problem
10 posts
Jun 18, 2005
More results from www.kia-forums.com

Kia Sportage Software Update - RepairPal


0helpful
1answer

Diagram of coil pack firing order on 2006 kia sportage

Firing order is 1-2-3-4-5-6
Cylinders on the head with the coil pack are 2-4-6 so the other head is 1-3-5
Its difficult to tell by the diagram but the coil sequence may be 3-4-5-2-6-1
diagram courtesy of autozone.com



25848486-y5zvmpub1gzt0i2h042pkgky-2-0.gif
0helpful
1answer
0helpful
1answer

206 kia sportage 2.7 engine firing order

kia sportage 2006 model has 2.7 firing order is 1 2 3 4 5 6
2helpful
2answers

2001 Kia sportage light indicates the 4WD is engaged but it is not

IT IS PROBABLY THE LOCKING DIFFERENTIAL. IT USES A VACUUM TO LOCK IN THE FRONT WHEELS. CHECK TO SEE IF THE HOSES ARE ROTTED OR CHRACKED OR TORN. OR IT COULD BE THE VACCUM TANK OR PUMP IS BAD
2helpful
1answer

Kia sportage 4wd won't engage, unrelated to vaccum hubs

a quick fix to solve the problem with the 4wd not working on the sportage is fitst check the vacume soionoid is working lockated by the suspention turet on theL/H side of the engine bay, then, chech hoses going to the hub, if there is still a vacume leek from the hub remove the 6 bolts from the outer hub locker place in vice remove the circlip, remove the spring, remove the spline gear then take the spring and swap it around so that it gose under the gear so that it is in conatant mesh/ lock, build back up and fit, it means the front axle will be live all the time but you will still be able to select 2 /4wd,,
Not finding what you are looking for?

180 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...