Manual for gasless wire feed welder model 117-050-910

A manufacturer or parts dealer might have such. This welder has been around at least since 2006. Not sure that you can get this support from the company but can't hurt to ask. I also point out an ebay alternative. Here is the identifying information about the welder:

Name:
Campbell Hausfeld WF205000AV Flux Core Auto Strike 85 Amp Welder Manufacturer:Campbell Hausfeld MPN:WF205000AV GTIN-14: 00045564610517

http://parts.campbellhausfeld.com/productsearchhelp/

http://parts.campbellhausfeld.com/man123/

https://www.fix.com/parts/power-tool/metal-work-and-weld/welder/campbell-hausfeld/

https://www.ebay.com/itm/Farmhand-Wire-Feeder-Welder-Slightly-Used-In-Excellent-Condition-/162115922055

The main Battery positive feed to the back of the alternator comes from the starter solenoid , has a fusible link . Did you hook it up correctly ? With a voltmeter check for battery voltage at the heavier gage wire at the back of the alternator .

come up as a mig welder

if not from centrury welder home page

ebay
CENTURY MIG WELDER PARTS amp OWNERS MANUAL 117 020 117 021 117 030 eBay

Run the power wire through an existing grommet in the fire wall. Then run it under the carpet/trim panels. ---------------------------------------------------------------------------------------
Super VAG K+CAN Plus 2.0

I have A 2000 BUICK century and need to know how to wire my amp red wire form the battery to the amp

you have misunderstood ,the brake and indicator lights work on one unit unlike europe which is seperate ,so you have a problem with the side lights whch have a feed to the radio for the panel lights ,also the side lights use the same bulb as the stop lights 12v 21watt and 6 watt and somehow the wiring is faulty and i suspect that the radio is connected wrongly using the feed from the lights instead of a different feed ,had this a few times with becker and grundig radios in europeon mercs and BMWs ,rev counter and speedo dont work among other things ,cause a weekend mechanic fitting a after market radio

has it done this before some wire feed welders the cheaper ones have hot switches mean that push wire all the time stuped i know but if it is not a hot switch than it is making contact some how and it could be inside the wip check it as best you can or take the wip in to where you got it from

I had this problem with mine and I just changed the fuse and now it blinks.

you may have a short in one of your speaker wires, or your antania

need codes to hook up radio to 1999 buick century