SOURCE: Need the correct torque specs for 2004 silverado 1500 calipers
hope this helps
SOURCE: Front Hub Bearing Torque specs to complete replacement
THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS
SOURCE: Need specs for 2000 alero 2.4L 4cyl.
Crank senser has 5 Volts ground and signal that flutters on ascope or waveform meter when turning over with the 5 volts on or running the cam senser is exctly the same just in a different spot and it looks a little different it works the same way as the crank. there both light switch failure on the quad 4 as theirs no half way they work or they dont and the car won't hit a lick if they are bad, no spark no injector no fuel pump wont even try or sound like its going to start fuel pressure is 40 lbs 30 running injector OHms are 1.5
478 views
Usually answered in minutes!
....
×