Question about Jaguar S-Type

1 Answer

Where is the fuse for the low beam passanger headlight

Posted by on

  • Bernice Turner Aug 03, 2018

    Sorry that is on a 2005 jag stype 4.2

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Jaguar Master
  • 1,140 Answers

The headlamp fuses are in the fascia fuse box right or left lower a post depending on market as follows . f9 rh low f10 rh high f11 lh low f25 lh low all 10 amp hpoe this helps

Posted on Aug 05, 2018

  • Bernice Turner Aug 06, 2018

    Thank you Paul I found the problem to be broken ground wire that plugs into the bulb so I'm thinking a whole headlight assembly wire is to short to splice and connect already tried purchasing two only to be out of almost 90 dollars to send them back because they were loose inside and did not work about to give up on finding a good used one again you for your response.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 491 Answers

SOURCE: headlights work on high beam but not on low beam is there a fuse

on these cars if 1 of the bulbs blow out then you will have to replace them both because they wont work. replace both headlight bulbs and they will be just fine

Posted on Dec 29, 2008

  • 1 Answer

SOURCE: low beam headlights not working on 2004 Pontiac Montana extended

You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.

I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp

Posted on Jan 06, 2009

  • 132 Answers

SOURCE: Low beam headlight is out, doesn't look like a fuse

Check the Headlight Switch. If your headlights come on automatically check the headlight sensor and its associated relay.

Posted on Mar 26, 2009

  • 3 Answers

SOURCE: Need to change passanger side low beam headlight,

You will need a 10mm socket with an extension that is at least 10 inches long. You need to remove the headlight assembly. Once you remove the bolts on top of the assembly there is one more bolt down low which is almost impossible to get to without that extension.
Once the assembly is loose, unhook the various connectors. Now the whole assembly should come out easily. The low beam headlight is held in by a spring clip. Don't touch any glass part of the new bulb and do use the electric grease they will try and sell you at the register. Once the bulb is changed it is just a matter of reinstalling the connectors and the bolts.

Posted on Dec 15, 2010

  • 1 Answer

SOURCE: 2002 Acura TL low beam headlight

How to Shift my headlight beam from position.
from I replace my headlight it's spatting directly on the ground..What can i do to change it from position

Posted on Feb 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PASSANGER HEADLIGHT WILL NOT WORK ON LOW BEAM. REPLACED BULB AND SOCKET, WAS TOLD TO REPLACE FUSE BUT CAN'T FIND WHERE IT IS LOCATED. cAN YOU HELP?


without knowing what kind of car you drive, it's impossible to give a correct answer. Most headlight fuses are in the fuse box under the hood.

Mar 11, 2016 | Cars & Trucks

1 Answer

High beams work for both lights, 1 low beam does not


Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?

May 31, 2015 | 2006 Mazda Tribute

1 Answer

2010 gmc canyon truck passange side low beem replaced and still not working


Check to make sure the fuse is not blown. The fuse for the low beam and high beam headlights are in the fuse block under the hood. Each light has its own fuse.

Nov 07, 2014 | 2010 GMC Canyon Regular

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

1 Answer

Low beam headlight - passenger side - on my 2006 Buick Lacrosse does not work. I've tried a new bulb - no help. The fuse - underhood fuse box - for the low beam is good. There is no voltage to that fuse...


From Info I have looked at I believe under hood micro switch relay 35 is for low beam and 34 is for high beam. It also looks like you have a different fuse for each light. The relay are for both low beam or both high beams. each headlight has its own fuse. I believe #4 fuse under hood is for passenger side low beam. fuses 1-4 under hood are for the four headlights as I understand the info I have seen.

Aug 04, 2017 | 2006 Buick LaCrosse

1 Answer

I have a 95 SC2. The high beam headlight on the passanger side does not work. Both low beams work, and when the high beams are turned on, the right side goes out completley. I tried a new light and then...


According to the wiring diagram, there is no relay involved.
The headlight switch provides the ground for the lights and they get power from a fuse for each side. So the high and low beam on one side is powered by the same fuse and the ground is thru the switch.
Could be the switch but chances are a wiring problem.

Feb 03, 2013 | Saturn SC Cars & Trucks

1 Answer

Low Beam headlight not getting power? swiched blubs both worked on passanger side no so on driver side.


i had this same problem on passenger side low beam--trouble was wiring from headlamp back to underhood fuse box located at rear of battery.

Oct 26, 2011 | 2001 Buick Century

1 Answer

No low beam headlights and only have high beams. when lights are off and I start the car and put it in drive the headlights blink


the low beam curcuit on the bulb is blown or there is a broken wire, usually inside the passanger side fender.its in the harness and its usually pink or red.

Mar 12, 2010 | 2002 Chevrolet Cavalier Coupe

1 Answer

Headlights on 1989 Nissan sunny


hi check your bulbs first but the problem is a bad ground or a faulty connecter look at the drivers side first clean all the grounds and connectors yates210456

Oct 12, 2008 | Nissan Z Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...