Question about Jaguar S-Type
Few things to check would be the battery, then the starter, and if that is good could be the crankshaft position sensor.
Take it to a good mechanic if you don't know how to check these out as that would be the best bet.
Good luck and hope this helps!
Posted on Aug 04, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Jaguar x type 2004 front bumper
Front bumper removal is quite easy. To start with there is 4 10mm bolts one by each headlamp ( with the bonnet open) remov them. There is 3 T30 screws that hold the under tray to the subframe and there is also a small corner trim that is on the bumper side of the front wheel arch here is 3 T30 screws holding them on on each side. Finally remove the front wheel arch lining so you can get acsess to the inside of the bumper. You will then see a 10mm bolt towards the top of the bumper that is reversed to you. Remove then the bumper should then just pull away.
Becareful not to damage the fog lamp harness upon removal
Posted on Apr 24, 2010
FULLY PRESS THE BUTTON THAT SAYS MODE AND THE CLOCK WILL FLASH PUT 24HR AND TYPE IN THE TIME THEN PRESS MODE AND WILL RESET
Posted on May 01, 2010
SOURCE: how do i fix my
its a factory scam for u to take it to them how ever turn the key switch on off five times in then push the throthle five more of course with the ingition on it should do the trick if not take it to some one that has a scaner and clear the codes its like fithty bukes well at least for me to baroow in charge lol
Posted on Apr 16, 2011
many things will cause no start problems could have faulty ignition switch.use test light see if power going to starter if not check ignition fuse to starter.if power going to starter, more likely starter solenoid or starter faulty.if ignition fuse okay and starter and solenoid okay still no start problem could be in the ignition switch or inhibitor switch faulty.code scan for faulty theft security system which will also cause no start conditions.
Posted on Oct 22, 2012
Tips for a great answer:
Jul 29, 2018 | Jaguar Cars & Trucks
Aug 02, 2017 | Jaguar Cars & Trucks
Dec 14, 2016 | 2001 Jaguar S-Type
Jul 14, 2017 | 2004 Jaguar X-Type
Jul 07, 2017 | 2004 Jaguar X-Type
Jan 23, 2013 | 2000 Jaguar S-Type
Oct 22, 2012 | 2001 Jaguar S-Type
Oct 16, 2012 | 2006 Jaguar XJ8
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: