SOURCE: 2005 suzuki forenza My car will not start up.
Check if the kill switch is engaged. Check for faulty starter solenoid or disconnected solenoid wire. Check for defective ignition switch. Check for defective starter motor.
SOURCE: check engine light on trying to find the location
Well, you know where the camshaft is..right? then look in that area for a sensor.
SOURCE: 2005 Suzuki Forenza timing belt breakage
hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart
Testimonial: "Really Fast Reply with very good information. THANKS!!"
SOURCE: 2005 Suzuki Forenza S Oxygen Sensor replacement
You will need to splice in the universal ones.
SOURCE: 2005 Suzuki Forenza Wiper Washer Inop.
first and foremost, check that all your fuses are good. If they are, your next step would be to pull the winshield washer motor out and test it by applying 12 volts from the battery directly to the motor to see if it turns on. if it works then your problem is in the wiring, check that you are getting power to the harness when you turn it on. Now, if the motor does not work while applying battery power, then you need a new washer motor.
109 views
Usually answered in minutes!
×