Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try
SOURCE: RADIO INSTALLING
with the bose sound system you have to bypass the audio system through the factory amp. the factory is located behind the right side of the glove box.
SOURCE: map sensor pin arrangement dodge cavan 2003
Hello, here is a picture of the connector and wiring.
MANIFOLD ABSOLUTE PRESSURE SENSOR (GAS) - BLACK 3 WAY
CAV
CIRCUIT
FUNCTION
1
K1 18VT/BR (3.3L/3.8L)
MANIFOLD ABSOLUTE PRESSURE SENSOR SIGNAL
1
K1 18VT/BR (2.4L)
MAP SIGNAL
2
K900 18DB/DG
SENSOR GROUND
3
F855 18PK/YL
5 VOLT SUPPLY
Pink/Yellow is #3, Blue is #2, and Purple is #1. Your colors may appear slightly different
SOURCE: I need the wiring diagram of pump it has 5 pins coming out of pump
hello, i holding a wiring diagram central locking system,model 201,it have a 6 pin,
hoping it"s help to solve your problem,ty
SOURCE: need wiring color code for a 2000 saturn SL2 for hooking up a trailer light four pin connector
The trailer wires are left turn, right turn, running lights(the smaller elements on both tail-lights and any side lights) and ground. Energise the corresponding lights and connect the wires accordingly. Find a good ground. A piercing test probe will find the correct wire for you if you can't track it to the bulb.
SOURCE: Grand am ignition key cylinder stopped turning.
There are no wires to your key and tumbler. All the key does is pull a rod that is connected to the ignition switch, which is at the bottom of your steering column. I suppose if there is no "chip" on your key, and you can get the steering wheel to turn, you could pull on that rod to get it running.
324 views
Usually answered in minutes!
×