Hello! please I Need The Full Wiring Diagram For automatic Heater A/C Control IN MY Hyundai santa fe 2013 model

Steven Mitchell

• 68 Answers
• Posted on Apr 01, 2009

SOURCE: hyundai santa fe 2003 model

You need a new fan switch.

SOURCE: need instructions on removing hyundai santa fe 01 fan belt ac

its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.

Ed

• 479 Answers
• Posted on Apr 21, 2009

SOURCE: ''check engine light'' illuminated, 1004 Hyundai, Santa Fe

If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.

Hope this is of some help.
Ed

Marvin

• 85242 Answers
• Posted on May 22, 2009

SOURCE: PROGRAM KEYFOB FOR HYUNDAI SANTA FE

This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.

SOURCE: interior fan control knob doesn't work

you have to remove the AC panel from the back side... the virtical console pops out and you can disconnect it (wire harness connectors) to get to it.