Your handbook should show where the fuses are located, normally under the bonnet or by the drivers knee area. there is a fuse for the fuel gauge.
SOURCE: fuel gauge does not work checked fuses none bad
The float would be the first place to look if the guage works but is not correct.
SOURCE: I just bought a 98'
The computer does a sweep test everytime it senses power. Check it next time you turn the key to run the gages do a little self test. However the fuse and gage won't be your problem. They are very bad for the fuel level sensor in the tank getting corrupted or dirty and doesn't read properly. You can try to add port fuel injector cleaner to the tank, but problem will usually reoccur. You will need the fuel tank dropped and the level sensor replaced.
SOURCE: The fuel gauge on my
Hello
If it was a fuse problem none of the gauges would work or the warning lights. The problem is caused by a defective fuel gauge sending unit that is located of course inside the fuel tank. To rpelace this part requires the fuel tank be dropped out of the car.
SOURCE: fuel gauge doesn't work. checked
The issue may be the the in tank fuel gauge float. Over time these can corrode and/or get gummed up which would cause it to get stuck. Another issue maybe the wires running from the in-tank pump to the gauge cluster, if one of the wires has become loose or broken, this would cause the issue as well.
SOURCE: 1993 crown Victoria gas gauge doesn't work always reads full
Your fuel pump may not be working properly
87 views
Usually answered in minutes!
×