2004 Chrysler Crossfire Logo

Related Topics:

A
Albert Shotnik Posted on Jul 17, 2018

2004 Chrysler Crossfire Error Code in Odometer = -22900,can't find the meaning?

5 Related Answers

Anonymous

  • 10319 Answers
  • Posted on Jun 09, 2010

SOURCE: 2004 Chrysler crossfire stuck in park and cannot

remove the shift solenoid by the shift cable inside the vehicle. then wire up the solenoids lock to the shifter to tow

Ad

Anonymous

  • 1403 Answers
  • Posted on Aug 13, 2010

SOURCE: Need to see A/C diagram to find part number of a

WILL TRY TO HELP,TRY WEB RESOURCEFUL.COM FOR AUTO MANUALS ONLINE

Testimonial: "Thanks?. I have found what I was looking for. Unfortunately the manual is somewhat expensive"

Anonymous

  • 1 Answer
  • Posted on Apr 29, 2011

SOURCE: 2004 Chrysler Crossfire Subwoofer behind driver

Did you have any luck with this? Mine has the same issue, and the power seats work when they feel like it...so I don't know how I'd get the thing out of there anyway.

allobd2

  • 1207 Answers
  • Posted on Jul 03, 2012

SOURCE: fuel light flashing in 2004 chrysler crossfire

bad fuel sending unit.
autocom cdp pro

Anonymous

  • 1 Answer
  • Posted on Apr 05, 2013

SOURCE: 2004 Chrysler Crossfire won't start. Drove in

This is not the problem I have a chrysler crossfire and experienced the same problem there is some good news if it frequently stops working for no reason the problem is most likely the RCM module has a shortage in it I fixed my crossfire and 3 others buy repairing the RCM its easy and simple any question you can email me I can give you a easy walk through to fix the problem and avoid paying hundred at the dealership it shouldn't take no more than 15 minutes to fix DIY!!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 Chrysler Crossfire. It wont turn over or go out of park?

Question edited for clarity.
Question moved from Computers to model category.

You soldered what 3 pins? If you are trying to bypass something, you are trying to fool two computers and it can't be done.

When you disconnect the battery, you have to reprogram the alarm and anti theft immobilizer.

https://www.google.com/search?q=2004+Chrysler+Crossfire+no+crank+no+start

and stuck in Park

https://www.google.com/search?q=chrysler+crossfire+stuck+in+park

..
0helpful
1answer

I have a 2004 crossfire got a check engine lite hook up computer got code 171 and 174 check code mass air sensor left bank lean replace sensor erase code couple days same code again

if the fault code is back the fault is not fixed , Check other reasons left bank is running lean. also check oxygen censer is not faulty.
1helpful
1answer

Wing deploys upon starting sometimes

HiThat means you battery is not strong enough and you need to change the battery.I have a 2004 crossfire and i had the same problem until i've changed my battery.
2helpful
1answer

Need code number to unlock radio for Chrysler crossfire

When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Chrysler service centre and get them to enter this code for you.
0helpful
1answer

Trouble code po400 and po410

Have a 2004 Chrysler Crossfire codes 412 403 135 155 154 134 want pass inspection cel stays on replaced secondary air pump same problem help !!
3helpful
2answers

2004 Chrysler Crossfire won't start. Drove in

This is not the problem I have a chrysler crossfire and experienced the same problem there is some good news if it frequently stops working for no reason the problem is most likely the RCM module has a shortage in it I fixed my crossfire and 3 others buy repairing the RCM its easy and simple any question you can email me I can give you a easy walk through to fix the problem and avoid paying hundred at the dealership it shouldn't take no more than 15 minutes to fix DIY!!
4helpful
2answers

I have an engine management light come on - tested - came up with a code PO410 - what is the next step?

P0410 is the error code for Secondary Air Injection System Malfunction
The secondary air injection pump pumps air into the exhaust to help heat the catalytic converter at cold start. This lowers the emissions at an otherwise high emission time.
A malfunction means that computer has registered either a pump failure (common on some models), fuse blown, or improper catalytic converter function.
Check your fuses. Whether you find a bad fuse or not have the codes reset. Some auto Zones can read and reset the codes. If the error comes back you may want to consider having the exhaust system checked.Problems with the catalytic converter\converters can have a large impact on your MPG.
3helpful
1answer

How do you reset the miles until next oil change

its something like hold the left odometer reset while turning the key on and it should bring up a menu that you can choose from
Not finding what you are looking for?

280 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...