Let me send you a manual so that you will have that information
http://www.championbrands.com/aera-torquespecs.pdf
SOURCE: Have changed cylinder head gasket and need the torque settings for the zd30 nissan engine
try this head torgue link.. that wont highlight
http://www.cylinderheadsaustralia.com.au/torque-settings
the ZD30 is listed half way down the list
and picture of tension sequence
HEAD BOLT TIGHTENING SEQUENCE.
• STEP ONE: 102Nm
• STEP TWO: Loosen All Bolts.
• STEP THREE: 44Nm
• STEP FOUR: +90*
• STEP FIVE: +90*
• IMPORTANT: ALL BOLT THREADS, BOLTHEADS AND WASHERS MUST BE LIGHTLY OILED.
• USING AN OLD HEADBOLT WITH GROOVE CUT DOWN THREAD, CLEAN THE BLOCK HEADBOLT THREADS.
why are these torque setting and sequence
numbers no longer on the VRS head gasket packaging
SOURCE: WHAT IS THE TORQUE SPECIFICATIONS AND SETTINGS FOR NISSAN CARAVAN ZD30 ENGINE
The best solution you'll get from books at www.reliable-store.com
These are books containing info on repair, service, troubleshooting, parts info, as sembling dis semble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc
354 views
Usually answered in minutes!
×