Where is the fuel filter located on a BMW 1 series UK E87 N43 116i (2.0L) petrol? I have taken off the under trays, nothing at all is visible!

SOURCE: Fuel filter and oil filter location on Bmw 320 td copact

If you removed the camshaft cover, you should probably replace the gasket or at a minimum insure that all bolts are torqued to OEM specification.

Look here for instructions and pictures for the oil change.

http://www.my330i.com/

The fuel filter is located on the bottom of the car, not sure which side, under a shield. Look here for pics and instructions.

http://bimmerinfo.com/diy/fuel-filter/

Hope this helps!

SOURCE: where is the oil filter located on the bmw 116i

right at the front in the middle below plastic housing. Has 1 large plastic cap on a metal lower casing, not metal bodied like old oil filters just has filter element. Also replace 'O' rings that should come with the new filter as the old will have squared off or become perished. I think you need a 27mm socket to undo the filer housing.

SOURCE: fuel filter location 08' volvo v50 1.8 petrol?

Removal & Installation

Print

NOTE The fuel filter is either on the left side of the firewall or next to the fuel pump near the left side of the fuel tank.

1. Before servicing the vehicle, refer to the Precautions section.
2. Relieve the fuel system pressure.
3. Remove or disconnect the following:
   
   Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket
   

1. Install or connect the following:
   
   Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
   
2. Start the engine and check for leaks.




Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models
Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Relieve the fuel system pressure.
3. Remove or disconnect the following:
   
   Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket
   

1. Install or connect the following:
   
   Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
   
2. Start the engine and check for leaks.
   
   

   Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5 cylinder models
   Using an open end wrench to push the quick disconnect coupler sleeves back-5 cylinder models

1. Before servicing the vehicle, refer to the Precautions Section.
2. Relieve the fuel system pressure.
3. Remove or disconnect the following:
   
   Negative battery cable Fuel filler cap Fuel lines from the fuel filter Fuel filter from the bracket
   

1. Install or connect the following:
   
   Fuel filter to the bracket Fuel lines to the fuel filter Fuel filler cap Negative battery cable
   
2. Start the engine and check for leaks.
   
   

   Fig. Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models
   Using an open end wrench to push the quick disconnect coupler sleeves back-5-cylinder models