SOURCE: Low pressure port 2000 ford explorer
im assuming your talking about the a/c low pressure port? it should be on the receiver/drier(steel can with 2 lines hooked to it) or in the lines connecting to it
SOURCE: location low pressure port a/c 2000 ford ranger 3.0
I am not sure I thought some of them were on the back of the compressor which makes it hard to see . but one thing for sure follow the low press line towards the evap and you will find it
SOURCE: I wish to locate the AC system low pressure port
The low pressure side has a blue cap on it, and is smaller than the high pressure side.
SOURCE: brake lights stopped working 1998 mustang
Fuse panel is under the dash also as I have found with my own graceful daughter, there is a brake light switch that connects to the brake pedal itself. It is hard to get to and even harder to see but a lot of times these switches get bumped and they can not make connection when the brake pedal is depressed. Hope this helps
SOURCE: 1998 ford mustang 3.8 v6 starting problems.
it's your upper intake manifold gasket. it has a crack in it and needs to be replaced. your getting to much air and not enough gas. mine did the same thing.
240 views
Usually answered in minutes!
×