Is also printed on the vehicle security module label. The vehicle security module is located under the dash somewhere . What cab does your truck have ? Reg. , super cab or crew cab? Regular cab ,it's located on the B pilliar , behind driver set . would have to pull the B pilliar trim panel . If you don't know how to do this , mite be easier just take to the dealer an have them hook up thier scanner an check it.
CAUTION: Prior to the removal of the vehicle security module, it is necessary to upload the module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed. For additional information, refer to Section 418-01 .
Item
Part Number
Description
1
-
Vehicle security module electrical connectors (part of 14A005)
2
W505253
Vehicle security module screws (2 required)
3
15K602
Vehicle security module
Removal and Installation
CAUTION: Prior to the removal of the vehicle security module, it is necessary to upload the module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed. For additional information, refer to Section 418-01 .
SOURCE: Need factory code for keyless entry pad
To locate the original keypad code, open the passenger/rear door. Pull the on-body rubber weatherstrip out, around the rear side of the door closure. Fold the right/rear seatback down into the locked position to facilitate access to the right/rear seat belt anchor. Carefully pry the upper plastic panel that houses the height adjuster and seat belt anchor off the body taking care not to damage the panel. Now pry the lower panel outward just far enough to enable access to the Vehicle Security Module, where you'll see three electrical connectors plugged into it, coloured green, grey, and blue. On the module will be a series of digits on a label similar to 5L2T-15K602-EA. Beside those digits are five numbers. Those five numbers are the keyless entry keypad code.
SOURCE: how to reset factory code on keyless entry ford five hundred
if you do not already know the factory code, the only way it can be obtained is by your local ford dealer. the proprietary computer equiptment they have can access the code that is programed in vehicles security module. if you purchased it used..it is often that the keyless entry code id card is still withe the owners manual..it is a 5 digit code printed on an credit card sized card that is white in color..i hope this helps you...good luck
SOURCE: factory keyless entry pad code where is it please.
You can take your registration and driver license to a dealer and they can use their diagnostic tool to retrieve it from the computer. It should cost 1/2 hour of labor. Call first & ask.
Also, look in glove box for a plastic "credit card" with the code on it.
SOURCE: Remove or disable keyless entry code.
this code is located on a module on inside left rear panel where your car jack is located you will need a flashlight to look up on the module there will be a sticker on this module with 5 digits this will be the original factory code to lock or unlock your car . inside your owners manual there is a procedure to change the code .
SOURCE: Factory code for keyless entry on a 2005 ford
You wouldn't really expect the whole world to know
your code would you? Your on the internet,people
know you & want to steal your vehicle
You go to a dealer with your tittle,registration,drivers
licence
They don't just give that to anybody
They will give you the factory code
Why don't you have the card it came on with
the owners manual?
If you got no manual, have the dealer write down
how used the key less entry & how to change the code
1,112 views
Usually answered in minutes!
×