Question about 2003 Dodge Durango
Check operation of the brake lamp switch and check 20A FUSE 5 in the power distribution center.
Posted on May 20, 2018
Testimonial: "is the power distribution system under the hood"
May be a fuse,brake light switch check wiring connector at switch.
Posted on May 20, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: # 4 fuse blew out,
I KNOW YOU HAVE AN ELECTRICAL SHORT.WAS AN ALARM INSTALLED OR ANY OTHER TYPE OF ACCESSORY? CHECK WITH DODGE TO FIND OUT ABOUT A RECALL.IF SOMETHING WAS INSTALLED, TAKE IT BACK THERE TO STRAIGHTEN IT OUT IF NOT HAVE A AUTO TECHNICIAN CHECK IT FOR YOU.
Posted on Dec 27, 2008
There are 3 machine bolts that hold the big white part of the head light to the truck. These bolts are black and I think 7/16 but not completely sure, maybe 12mm or so. You'll need sockets, ratchet and a really long extension. Two regular extensions won't reach the bottom one. You get to all three of them from the front of the truck straight in. Once those are out, the head light assembly pulls forward and can dangle from about 10-12 inches of extra wire. This is attached to the bulb harness. 1/3 of a turn and the wire and bulb come out of the head light. Pop the new bulb back in WITH GLOVES, do not touch those halogens. And put it back together. You can use peanut butter in a deep well or regular socket to hold the screws in to get them started, or the rag thing.
It took me 14,607 hours to find these bolts and about 10 minutes to do the job! Hope it helps out!
Posted on Feb 25, 2009
2003 dodge neon sxt
Here are the steps;
) Park on a level surface. safety
) Block all the other wheels. safety
) Put the vehicle gearshift in PARK. safety
) Release the handbrakes.
) Slightly break the rear wheel lug nuts seal while on ground. Just loosen do not remove.
) Jack up the rear wheel.
) Check to see the wheel will turn so you know the brake shoes are not binding against the drum.
) Now you can remove the lug nuts and wheel.
) Remove the drum. Some times the drum has frozen on with rust. You may have to use a hammer and hit along the drum near the outer edges to break it free.
Posted on May 08, 2009
the speed sensor for this vehicle is actually in the rear differential of the vehicle. this is the sensor that runs the speedometer also known as the vehicle speed sensor. there are also two speed sensors in the front one on each wheel known as wheel speed sensors these are for the abs system only
Posted on May 17, 2009
Tips for a great answer:
May 20, 2018 | Dodge Cars & Trucks
Sep 15, 2017 | 2003 Dodge Durango
Oct 29, 2011 | 2003 Dodge Durango
Mar 21, 2011 | 2003 Dodge Durango
Mar 12, 2011 | 2003 Dodge Durango
Jul 23, 2010 | 2003 Dodge Durango
Dec 05, 2009 | 2003 Dodge Durango
Jul 21, 2009 | 2003 Dodge Durango
Jun 28, 2009 | 2003 Dodge Durango
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: