Taillights will not work, but turn sig, brakelights work, fuses are all good

Sounds like you have one or more blown fuses. Check the fuse panel for anything that looks blown and replace the fuses. If all fuses are good then there is likely an issue with a wiring harness.

Both run off the speed sensor so if one is working and the other is not it's got to be in the instrument cluster.

First check fuse. If good go right to brakelight switch on top of brake pedal under dash. Check for power into switch pedal up. If you have power in, press pedal down you should now have power out. If not you need brakelight switch. If you do have power out you have corroded or broken wire from switch towards taillights. Usually back by rear wheels. Need to trace wire to where there is a problem.

check your fuses

Have you verified that all the ground wires are good?

check all fuse for the taillights again, make sure all bulbs are good. it blink fast because a bulb is out.

check power into & out of brake switch if good then start testing wire to back untill you find a spot where you lose power

the stratus' are well known for the brakelight switch on the brake pedal going out frequently!!
so go to nearest parts house and buy a brakelight switch, that will most likely fix your problem!!
:-)

check the earth wire and fuse for your taillights

check the fuse that are labeled park lights or tail lights.

tnx 4 using fixya,

drcool