SOURCE: 2003 MITSUBISHI GALANT HOW TO REPLACE HEADLIGHT BULB
First you disconnect the 3 prong electric plug. To disconnect squeeze the side tabs together (hard) and pull away from the bulb, then you can pull off the protective rubber covering, (its a little snug so give it a tug from the 2 tabs on the top and bottom).
Next unscrew the little Phillips head screw to loosen the bracket that clips in the bulb (take note of how the clip is installed before you remove it, it holds the bulb securely in place).
Just loosen the screw as you do not need to remove it all the way. Pull out the old bulb and replace it with the new one.
The bulb has 3 spacing tabs on it so it can only go in one way. Make note of this when you remove it so you may replace it the same way. follow the steps in reverse and your done.
Note: The little wire clip that holds the bulb in can be a pain. Make sure you get a really good look at it, since it pops out as soon as you loosen the screw. If you get lost, you can always look at the other headlight. Oh, and don't do this in the dark.
SOURCE: hi, how much oil should I put for 2003 mitsubishi
Hello tiffanytong1: My name is Roger and I can help you. The correct amount of oil when also replacing the oil filter is four and a half quarts. Should you need further help please just ask. Please rate the answer as this way I know it was helpful. Thank You for using Fix Ya. Roger
75 views
Usually answered in minutes!
×