Your best bet is to call a local parts store and ask this question because some are some are not they can look it up for you no problem.
SOURCE: how to remove lower ball joint 2001 chevy silverado 2500 hd 4x4
The reason is they are pressed in and you have to press them out with a tool and some have a C clip that has to be removed you can go to schucks or autozone to rent the tool to press out and it has to be pressed back in.
SOURCE: knock sensor on 2001 chevy silverado
on the 4.3l version the knock sensor is on the back left side of the engine right by the bell housing. on the bigger engines they are below the intake manifold in the engine valley
SOURCE: 2002 chevy silverado 4x4, brakes
did you bleed the brakes in the proper order? RR LR RF LF. check rubber lines for deterioration or BULGING when you apply brakes.
SOURCE: steering loose on 1994 chevy 4x4
check the idler arm and pitman arms
a quik and dirty way to check for play in the front end
is to have an assistant rock the steering wheel back and forth while feel an all the joints in the steering gear for play.
there will likely be more than one loose joint.
79 views
Usually answered in minutes!
×