No oil in reservoir
electronic control wires problem to valve body
failed seal on ram piston by passing oil
faulty over load pressure valve releasing at too low a pressure
pump not working --electric motor , motor contacts or if mechanical , no drive action on pump shaft
NOTE-- SAFETY DENOTES THAT YOU PLACE A SUBSTANTIAL PROP UNDER A RAISED BODY AS IT DROPS AND ACTS LIKE SCISSORS ON ANY THING BETWEEN IT AND THE CHASSIS
SOURCE: fuel not getting to throttle body
SOUNDS LIKE YOU HAVE A PLUGED LINE OR BAD INJECTORS BUT I WOULD LOOK AT THE LINES FIRST
SOURCE: I have a 1985 Chevy 1 ton dump truck. It will not
Check the fuse-able link going to the cab portion of the firewall, check by gently pulling apart on the wires on either side of link.
95 views
Usually answered in minutes!
×