What does a code 52 mean on a 2013 chevy sonic

big-manuals.com is the best source of all kinds of manuals.
May be you'll get some information
https://big-manuals.com/products/chevrolet-chevy-sonic-complete-workshop-service-repair-manual-2012-2013-2014-2015-2016

2014 CHEVROLET SONIC CODE 52 RESET

Code 52 comes on around 100k miles when the timing belt is due.

The code is designated as 'urgent' so can not be re-set using the turn signal switch. To re-set the reminder you will need to pull the fuse for the instrument cluster and leave it out for 2 minutes, this will cut power to the cluster long enough to re-set the indicator.

Remember to change the timing belt first!

it;s a fuel calpak code. You can try to reset it.. Pull the fuses for dash and DIC... wait 3min, and then put back. On your '13 sb fuse numbers 14,17, and 25.
Best to you.

Check out this info below.

http://www.sonicownersforum.com/forum/chevy-sonic-owners-forum/2803-code-82-a.html

Hai my chevrolet sonic sedan 2013 appear code 89 please explain me what is mean

The code is designated as 'urgent' so can not be re-set using the turn signal switch. To re-set the reminder you will need to pull the fuse for the instrument cluster and leave it out for 2 minutes, this will cut power to the cluster long enough to re-set the indicator.

take out fuse 26 under dash fusebox for two minutes

The wrench symbol normally indicates that there is a mechanical/ service problem that needs a service attention. Run the fault codes to check out the sensor that put the light on. Probably needs an oil and filter change.