Steps to take it off
SOURCE: rear turn signal bulb on a 2001 Chevy Monte Carlo
Its Accessed Through The Trunk Pop It And There Will Be Either A Panel To Remove Or Carpeting Material To Move Aside And You'll See The Wiring Harness With The Light Twist And Pull To Get The Bulb You Want Out.
SOURCE: How do I install front & rear bumper covers on a 1999 Honda CRV?
hi there try this site for a full manual for your car
http://www.haynes.com/products/sfID1/3/sfID2/5/sfID3/62/listPage/2/productID/202
it will give you a step by step instructions for your repairs
regards JR
SOURCE: how to remove a tie rod end on a 1999 chevy monte
first break lose the locking nut on the rod, just break it lose!!!
the take off the nut holding thr tie rod too the hub mount
then take a hammer and hit it up
if that doesnt work use tie rod end remover
then just unscrew it
in stall the new on back too where you breok the locking nut lose thats your adjustment, out it all back together,and lock down the nut !!!
SOURCE: 1998 Chevrolet Monte Carlo brake lights do not
I had to replace the turn signal switch in my 1998 z34.Now everything works fine.
95 views
Usually answered in minutes!
×