Cars & Trucks Logo

Related Topics:

E
Earl Posted on Apr 10, 2018

Silverado 1500 2001 right side door will not open. Both door handles don’t work actuator not working

5 Related Answers

Anonymous

  • 88 Answers
  • Posted on May 20, 2009

SOURCE: 1999 BMW 323iS drivers side door. I cannot open

you are correct they are flimsey and get fatigued with age easy to replace harder to find

Ad
gfischer21

George Fischer

  • 236 Answers
  • Posted on Jun 17, 2009

SOURCE: 2003 Honda Pilot Door locks not working

may be a relay switch, or a faulty wire on the right side behind the glove box

Anonymous

  • 1 Answer
  • Posted on Jul 18, 2009

SOURCE: cant open right rear pasenger door 2005 pathfinder

i started by removing ashtray and the screw underneath. it would be easier to remove rear seat as access is not so good to move around. wind window down, then carefully pull from top of trim, it should come away fairly easy. the trim is held on by push in clips but you need to careful as they break easy. behind the inside door handle is a plastic backing plate which i found easier to remove first. now the outside handle can be undone and i simply pulled the cable and the door opened. the cable was broken where it joins the handle so a new cable is needed.

Anonymous

  • 1986 Answers
  • Posted on Sep 04, 2009

SOURCE: rightside interior door handle not opening door

It could mean the rod connecting the handle to the latch has broken. You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. and you can access the innards of the door

doug dunn

  • 36 Answers
  • Posted on Oct 26, 2009

SOURCE: I went to open the driver side door and the

the door handle is either broke or a part of it has slipped loose, either way, you'll have to remove the inner door panel to get to it, this is not difficult, a few screws and the panel is retained by push in type plugs that can be pryed loose. the entire door latch assy is held in by screws and is serviced by replacement, the difficulty come with very tight area to work in, and is irritating and time consuming, if you are not good with tools i'd suggest a good mechanic or body shop. always get a quote!!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Drivers side door closed and will not open.

Remove inner door latch and try operating the rod manually (vice grips). If locked, spray everything inside the door with WD-40 or the like and try operating the lock.
0helpful
1answer

Driver side door lock not working, how to fix it?

The door latch maybe the problem. That needs to work properly before the lock actuator will function properly.
0helpful
1answer
35helpful
2answers

AC blows hot air on the driver side and cold air on the passenger side

You may have a bad temperature door actuator motor on the drivers side. The actuator is what moves the temperature blend door and when it fails it usually moves the door all the way to the "hot" position. Sometimes if you shut the vehicle off for a bit then restart it the system will work fine for a while then the actuator will again swing the door all the way open or shut. I've replaced several of these actuators [both drivers side and passenger side] for similar problems.
1helpful
1answer

Ford explorere rear door will not open

check the door handle in side door panel there is a rod that goes into the door handle that might have fallen out of it or more likely broken the door handles at a junk yard are about 5 dollars if you take off make sure it function that none of the teeth of the handle are broken and and make sure you have the right or left door handle it will be marked on inside of interior door handle . this handle slides forward towards the front of vehicle for removal then turn to remove rod from handle.
4helpful
2answers

1999 Silverado - cannot get the temperature to switch from cool air to warm air when turning the knob to heat.

The temp blend door, or blend door actuator may be faulty. You can check this by watching the movement of the blend door actuator while you turn the temp selector knob. If the actuator is working, then it may be the blend door, or blend door lever broken. If these are ok then the control head may be faulty.
8helpful
1answer

2000 Chevy Silverado 1500 The heater does not

Had the same thing happen to my truck, the blen door actuator is under the console on passenger side, but the heater core is going to be clogged if you dont have any heat coming through, but a/c works..
0helpful
3answers

Rear door stuck on 1997 Pathfinder...Have

go inside, lift on handle, then beat the **** out of the door pounding it like your trapped in it trying to get out. latch mechanism is probably corroded and froze shut. once open, spray with wd40 and work the lever a lot. then get door panel off to see if handle is broken inside
Not finding what you are looking for?

111 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...