I have a 2000 Elantra and my tag lights won't come on I put a new bulb and all my other lights work fine just not the tag lights were can I find the fuse for that is it under my hood

SOURCE: bottom brake lights not working

check near and the connectors near the bulbs for loose connection and check that ur bulbs are insertd in the right position ring main dealer and ask would there be a secondary fuse box in your jeep and explain the problem

SOURCE: 1999 cougar brake lights not working Fuse+bulbs+switch ok

I am asking you what switch you cheked and how did you know that is ok and working I had the same problem I replaced the switch under the brake pedal and it works fine if you still have this problem write to me @ [email protected] thank you good luck.

anwar alkhaldi

• 197 Answers
• Posted on Mar 16, 2009

SOURCE: How to replace headlight bulb hyundai elantra 2004

yes , you need to remove the headlight cover from the back after u move the bulb conector then there is a holder for the bulb u need to push down then move.
i hope it help ,,,, thanx

Jim Goldsmith

• 2005 Answers
• Posted on Apr 21, 2009

SOURCE: Non-working tail lights

Tail light bulbs used are double element one is tail one is turn check your bulbs and, make sure the lamps for your turnsignal have two pins and, are a different number than your other lamps

SOURCE: Low beams not working. Brights, fog, turn, and

how to install low beam light for 2007 mercedes e350