SOURCE: 2001 gmc yukon xl 1500
Check to see if the power steering pump is still turning. If you have a broken drive belt (serpentine belt or "fan" belt), and the pump doesn't turn, you have no power assist. If the pump is still turning, check the fluid level in the reservoir.
SOURCE: u-joint repalcement for 2001 yukon xl
Mark your drive shaft coincidenly with the rear axle and tranny. Remove drive shaft. Press out the old u joints and press in the new. You will need a torch for heat and a lot of patience. Have fun!
SOURCE: My GMC yukon XL 2001 engine runs after 4 times of cranking.
Try turning key to on only, not start, 2 or 3 times first then try to start. If it starts good first try, then I'd change my fuel filter & then have fuel pressure tested if fuel filter didn't help. You may be looking at a new pump, but lets do filter & test fuel pressure first.
SOURCE: 2001 GMC Yukon XL
YOU CAN GO DEALERSHIP OR THE SALVAGE YARD PROBABLY HAVE A WASHER FLUID TANK AND HOSES IN GOOD SHAPE.
SOURCE: how do you reset oilchange light on a 2001 yukon
turn key to on position, pump gas pedal to floor 5 times and turn off key. start vehilce. Change oil light should flash for 7 seconds and then go out.
74 views
Usually answered in minutes!
×