SOURCE: How to replace my 2001 ford taurus fuel pump
2001 Ford Taurus V6-3.0L DOHC VIN S
Fuel Pump: Service and Repair
REMOVAL
1. Remove the fuel tank.
2. Clean the area around the fuel pump mounting flange.
3. Using the special tool, remove the fuel module retaining ring.(Screwdriver and hammer)
4. Remove the fuel delivery module from the fuel tank.
CAUTION: The fuel delivery module must be handled carefully to avoid damage to the float arm, filter, and convolute hoses.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: A stop should be felt when aligning the raised arrow on top of the fuel tank delivery module to the dot on the fuel tank.
Testimonial: "Very helpfull, except i think I installed it wrong because its doing the same thing, Fuel gauge is not working properly, I did not notice any arrows o"
SOURCE: how to replace a water pump on a 2001 ford taurus
This is for a 3.0L and VIN S engine--
VIN U Engine
To install:
NOTE
The water pump bolts are of different lengths and must be installed in the correct locations.
SOURCE: I need a replacement keys for 2001 ford taurus
A good place to start is a ford dealer. Often they can cut you a key off the VIN number. You will have to go there in person., and some kind of proof of ownership would be needed!
347 views
Usually answered in minutes!
×