Question about Subaru Forester

1 Answer

My 2017 Forrester does not shift out of low until it reaches 3000-3500 rpm when it is cold. My car is in the garage and the coldest it gets is 45 degrees

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 25 Answers

Check oil level and colour in the box if black or sludgy then change if not then look to torque convertor issue

Posted on Apr 12, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 9 Answers

SOURCE: Delay in Shifting

You have 2 solutions, either to get the TCU referbished/ repaired

or totally change the transmission system. I did the second one.

Posted on Jan 07, 2009

  • 1861 Answers

SOURCE: Transmission when cold does not shift until 2800 rpm

Synthetic fluid is NOT recommended for your transmission. The best advice I can give you is to go and have the transmission completely flushed, and put the correct fluid, from Toyota, into the transmission. If you keep driving it with the synthetic fluid, you are going to damage the transmission beyond repair.
Also, get your money back from Sears.

I hope this helps you out. A FixYa rating for my assistance would be greatly appreciated. Thanks for choosing FixYa for assistance.

Posted on Jan 21, 2009

  • 13 Answers

SOURCE: high rpm shifting

Does your van have an "EAT" switch -- lower right hand side of instrument panel?

Pressing the switch in changes the shift points by making the transmission shift at a higher RPM.

If the van has the "EAT" switch and it is engaged, try pushing it in again to disengage it.

bikerbc.

Posted on Mar 24, 2009

  • 160 Answers

SOURCE: problems wont pass 4000 rpm's

Depending on the model of accord. It may be a VTEC malfunction in the computer. If it's an EX it is a VTEC

Posted on Jun 16, 2009

  • 119 Answers

SOURCE: The engine will not idle when cold

possibly the coolant temperature sensor is faulty

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Coolant leak


the reason for the low heat is most likely you're low on anti-freeze. If your water pump is dripping, most likely you need a new one.

Dec 07, 2013 | 2007 Dodge Nitro SXT

2 Answers

Loss of pulling power during shifting


Check fuel flow and pressure , if pressure is low check fuel pump. if flow is low replace fuel filter.

Oct 07, 2017 | 1995 Ford Mustang

1 Answer

My 1999 Silverado 5.3L automatic won't shift from 2nd to 3rd until 2500 rpm when it's cold. When warm works fine but 1st to 2nd shift won't happen until 2500 rpm, speratically. Transmissio


I had a friend that had this problem.I work at a G.M.dealership and I ask a friend that does trans work there.He said this is normal in cold weather.This is done in order for the trans to reach operating temperature sooner.This could be why you are unable to fix this problem because it is normal.I looked in service info to see if I could find a bulletin or something to back this up but I did not find anything.I know this guy very well and I know he knows his work and is good at it.Hope this helps.Good luck.

Feb 25, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

In manual mode, is the tiptronic supposed to stay in the gear you choose until rev limit is reached? Or will it shift up on its own before the limit is reached?


It will only downshift on its own, it will stay in the selected gear until the RPM is too low and downshifts or until you manually shift to a higher gear.

Jun 06, 2011 | Porsche Boxster Cars & Trucks

1 Answer

Transmission is not operating correctly when cold. The RPM's are above normal operating levels prior to shifting. After the vehicle travels a couple of miles, all is fine. Normal operational RPM's are...


The PCM is allowing torque converter slippage until the transmission reaches normal operating temperature because cold transmission fluid is a drag on the engine and causes it to burn more fuel.

Jan 16, 2010 | 2002 Oldsmobile Alero

1 Answer

On cold days, temp takes miles to come up and the transmission will not shift into top gear until then. Limits speed to around 50 MPH until this happens, not wanting to run the engine at a high RPM. Today,...


Yes this sounds like a thermostat problem, replace the thermostat, Delay on transmission shift is a common problem, you could try changing transmission oil.

Jan 08, 2010 | 1991 Toyota Camry

1 Answer

Car does not shift when cold


you can try a bg trany flush and also have the shift pattern reset, what you do is unhook battery for 3min, then connect batt back start and put in low gear start to drive and shift up as you would what it to shift do the same until you reach drive then it should shift that way unless theres atrany problem, but try that bg flush first,hope this is helpful.

Nov 13, 2009 | 1993 Dodge Caravan

2 Answers

2000 GMC Jimmy's RPM's too high when shifting


Replace the shift solenoids (there are two) inside the tranny, just in front of and to the right of the tranny filter.

Mar 21, 2009 | 2000 GMC Jimmy

2 Answers

Overdrive not shifting correctly


Not sure on yours but on my vehicle, it doesn't shift up until engine reaches a certain temerature, and right now in the winter weather it takes a little longer. On mine it's normal.

Dec 18, 2008 | 1999 Honda Accord

1 Answer

2000 Volvo S40


one unit that operates ratio changes and is connected to the engine is that vacuum operated actuator on the transmission
it is possible that that unit is failing , vacuum hose is leaking and that will cause ratio changes as the vacuum varies
run the fault codes to check for wiring problems or VSS or TCM problems as well

Mar 23, 2017 | 2001 Volvo S40

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

Marvin
Marvin

Level 3 Expert

84619 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...