Hi. Thanks for your question. For assistance of removing rearshaft in a 2007 chrysler Pacifica you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!
Testimonial: "Went to your site and you don't have the work shop manual for a 2007 Chrysler Pacifica. Know what you have before trying to make a sale"
SOURCE: Why does'nt the Cruise Control Activate 2007 Chrysler Pacifica
Hi Daniel, I'm glad to help! One of the most found problems with cruise control's inoperative here at the dealership is a vacuum problem. If you do not have vacuum from the engine to the cruise control under the hood, then even though the rest of the system is working fine it will not pull the accelerator pedal. NEXT: Another problem could be that the cruise control unit under the hood is not getting power from the brake switch. Check and see if there is power at the unit's connector under the hood. If there is no power then replace the brake switch. NEXT: The PCM may not be getting a signal to apply the cruise and this mainly happens because of a cruise switch problem OR the signal is not getting through the "Clock Spring". This could be either one causing this problem, so replace the switch first because its cheaper. If all of these things check out good then it could be the Cruise Control Unit itself. Hope this helps and have an awesome day Daniel.
SOURCE: How do I remove rear hub assembly on a 2004 front wheel drive Chrysler Pacifica
the rear hubs on a front wheel drive car are removed in the same manner as a rear wheel drive car with no front wheel drive
in effect the car is reversed on the chassis all procedures are the same
SOURCE: How to remove a rear drive shaft on a Chrysler pacifica allwheel drive 2004
http://www.alldatadiy.com/about_alldata/repair.html
try this web site for the details you are looking for. Hope this helps.
570 views
Usually answered in minutes!
×