Fault code 01314 Audi A4 2012 1.8 TFSI

SOURCE: x-type jaguar automatic (gear box fault)

remove the positive battery cabelf ro 10 mins to reset the computer....

SOURCE: HOW TO RETRIEVE ECU FAULT CODES 94 HONDA CIVIC

Try a honda civic forum online or maybe autozones free auto repair information site online. Check your fuel pressure, spark, timing and air flow meter. When was the last time the car was tuned up? Check air filter, fuel filter, spark plugs, distributor cap+rotor and the ignition timing. Check for loose or corrosion around and or on contact points of wiring ( power, ground, and your spark plug wires if theres any sign of wear or corrosion.) Make sure fuel is fresh and not stale from aging over time.

SOURCE: Gearbox fault of Jaguar S Type

unfortunately when that code, and that gear box fault light comes on, its pretty much game over for the transmission. It only a matter of time before performance of the transmission gets worse and worse. BUT that transmission is VERY easy to replace, i would check out a few trustworthy independent shops to give you a better price! I am usually a die-hard dealership, having been working at this jaguar land rover dealership for the last 2 years, but you are pretty much for sure going to be a cheaper price on the labor and like i said it is a pretty easy task.

My only precaution MAKE SURE IF YOU GETTING A USED TRANSMISSION THAT YOU GET SOME TYPE OF WARRANTY ON IT. Too many times have I seen customers loose thousands of dollars paying someone to put a used engine or transmission and have it fail almost right away.

SOURCE: mercedesw202 c200 pms ecu system . car wont start

Hi I have a 1995 C200 Auto Sedan chs WDB 2020202F241703, I think I have a problem in the ECU. Only runs on two cylinders, I have changed the core pack on the 1 & 4 cylinders but the problem persists. The other problem is I don't know where the ECU (engine computer ?) is can anyone help ?

SOURCE: R reg Megane Scenic non start

Sounds like your taking too long to put the key in the Ignition and turning.If this happens, just press the button on ignition key to lock the door then press again to unlock then put key into ignition and turn to start! If this doesn't work then it might be something more serious than that!