You will get your solution and all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV, , owner's/service/repair/parts/maintenance manuals etc everything
this website www.reliable-store.com
it's a very good website for vehicle problems even as old as 1991 ford..
SOURCE: head bolt torque specs for 2000 dodge neon 2.0 SOHC
I have the specs and diagrams. If you want me to send them to you, give me your email address. [email protected]
SOURCE: need head bolt, intake manifold, and exhaust torque specs
Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks
SOURCE: 2003 ford windstar runs rough won't idle. plugs,
Possibly but check the map sensor as this will also cause this try disconnecting it if it idles and doesnt die then youve found your problem als be a good idea to check the codes and see what they are telling you let me know something good luck.
SOURCE: looking for cylinder head torque specs and intake
on the 2.5 4 cylinder
step 1 18 ft lbs.
step 2 26 ft lbs. except bolt #9 re tighten it to 18 ft. lbs.
step 3 all bolts an additional 90 degrees.
intake manifold bolts 65 ft lbs.
on the 3.3L V6
step 1 35 ft lbs.
step 2 tighten all bolts an additional 130 degrees
step 3 tighten center 4 bolts an additional 30 degrees
intake manifold bolts 88 in. lbs.
1,051 views
Usually answered in minutes!
×