Oxygen sensors are usually located in the exhaust system. Assuming yours has the V6 engine you have 4 fitted. They are labelled in the attached photo.
SOURCE: I need location of oxygen sensor on a 2001 town & country
ALL of your oxygen sensors are located i your exhaust system Your exhaust system starts at the exhaust manifold on the side of the engine and ends at the tail pipe by you back bumper. Your vehicle oxygen sensors are 4 of them there are two on each side of your exhaust the are actually screw into the exhaust they are like the nose of you engine to read how rich/lean the car is running. The are pretty simple to replace, they look kinda like spark plugs with wires attached to them the wires are usually colored white black and grey with plug connections on the end. To replace get a oxygen sensor socket and a ratchet and unscrew this socket can be bought at almost any auto parts place like auto-zone etc. Good luck and thanks for using FIX YA
SOURCE: need to know where sensor 1 (oxygen sensor) on bank 1 is located
It would be on the left header pipe as you sit in the truck. Its the sensor in front of the cat
SOURCE: Need to replace the oxygen sensor in my 2003 suburban
Ther are at leat 3 and maybe 4 o-2 sensors in that particular truck...one on each exaust pipe coming down from manifold...and one after convertor on each bank....Pass.side before convertor is bank one,sensor one ..behind convertor is bank one sensor two..drivers side before convertor is bank two,sensor one...behind convertor is bank two sensor two(If equipped with four....scan will tell you which one is bad....good luck..lee
SOURCE: 2003 Hyundia Tiburon BCM
http://www.newtiburon.com/forums/showthread.php?t=102241&highlight=bcm
901 views
Usually answered in minutes!
×