I really think you should go to www.reliable-store.com they have got books on every vehicle and also how to service/repair it, parts info, wiring diag, electrical diag, fuse diag, error codes, etc everything
SOURCE: installing a Nissan Sentra Passenger Side Manual Non Folding Mirror.
had to install a driver side non folding mirror, fairly simply to say the least. There's a cover on the interior of the door, near the window, remove the cover, remove the 3 screws, need i believe a 10mm socket. If a power window, unhook the circuit. Replace new mirror.
SOURCE: replacing door handle on nissan pickup
Lift up the handle, you will see the bolts there, You will also have to pry off inside door panel (after removing any screws) than you will have access to the nuts. That's all there is to it.
SOURCE: engine head torque settings for 2005 nissan sentra 1.8
email me ill send you it via email cant post here too bigg!!
SOURCE: how to remove front passenger side interior door panel
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
SOURCE: Removal of Front Door Handle Pintara Nissan
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.
75 views
Usually answered in minutes!
×