SOURCE: replace thermostat 2003 pontiac montana
yes but with the right shaped wrenches and tiny hands it can be done without removing the exhaust crossover pipe
SOURCE: 2003 Pontiac Montana Front Wheel Bearings
Remove the wheel, remove the hub nut, remove the brake caliper and rotor, put your socket and extension through the hub flange onto the bearing retainer bolts, undo them, release the abs sensor connector if it has it, remove the bearing and hub flange as an assembly, put the new one on and go backwards from here. Torque the hub nut to 180 ft/lbs, your done.
SOURCE: 2003 pontiac montana leaks condensate water in the drivers floor
Bet the drain is clogged with leaves. Look under the blower motor under the hood. Can almost be that the cowling has been filled with leaves at one time or another. Got to clean that stuff out every now and then.
SOURCE: where is horn located on Pontiac Montana 2001
Check the front of the radiator on the drivers side, it might be mounted right to it or the grille fascia.
SOURCE: 2003 pontiac montana key wont turn first time this
the tumblers in the ignition cylinder is jambed.
replace the lock cylinder to fix this problem
139 views
Usually answered in minutes!
×