How do I reset the message lights on the instrument panel of a 2010 V-50 Volvo after performing a do it yourself maintainence operation. Example : Oil Change

Marvin

• 85242 Answers
• Posted on Nov 10, 2008

SOURCE: changing instrument panel light bulbs

You have to remove the entire cluster assembly to get to the bulbs, there is no other way, no room for this man's hand at the back.

SOURCE: 2008 Ford Escape oil change message

to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !

SOURCE: Need to reset perform service light after oil change.

Press the step button until miles to service comes up, then press and hold the reset button.

Jeffery Lewis

• 329 Answers
• Posted on May 28, 2009

SOURCE: BMW528i 1999-How do you reset oil service light after oil change?

With the key in the ignition but in the off postion press and hold your odometer trip button in then turn your key to the first postion hold the trip button in for 5 seconds the display will read oil service or inspection then it will say reset release the button and then press it again untill the reset starts to flash then release and press the button briefly to reset

SOURCE: how do I reset the oil maintainance warning light

WITH IGNITION SWITCH OFF PRESS AND HOLD BUTTON ON THE TRIP ODOMETER THEN .SWITCH IGNITION ON WITH ENGINE OFF.CONTINUE TO HOLD BUTTON UNTIL MAINTANANCE REQD LAMP EXTINGUISHES RESETTING IS DONE.