If you're finding it difficult to service/repair your car, get one of those online manuals. You'll not have to wait for others to answer, or rely on mechanics and all. Plus I
know a website that has very good manuals online, without expiry i.e. for lifetime.
www.reliable-store.com
SOURCE: 2001 Hyundai Sonata V6 engine fails to warm-up - fans don't work
The sensor is located at the radiator. follow the wire from the fan to the plug on the sensor. I hope this helps.
SOURCE: alternator problems
To change the alternator you do not have to romove or loosten the engin mounts. It is a tedious job but it can be done by loostening and removeing the bolts that hold the alternator on. There is also an adjuster on the alt. to tighten the belt up when it is replaced. You should have this done by a technician so you have a warranty with the job. I hope this helps. don,t forget to rate my answer
SOURCE: drive belt routing diagram
Is that your answer for everything there should be a diagram under the hood, do you think people get on here for answers like that, that is the first thing i did. Get another hobby.
SOURCE: do i have to disconnect motor mount to replace my drive belt
Depends on the motor. If there is a mount on the passanger side that the belt goes around then yes. Don't fret though, easy to get around. Use a jack and a piece of wood on the oil pan to support the motor so you can remove the motor mount to remove the belt. Again, this is on SOME gm motors not all. On the others the mount isn't in the way at all.
85 views
Usually answered in minutes!
×