SOURCE: '96 Ford Expedition Hub Assembly
i believe there are three bolts holding the hub assby on, it comes as one unit, or, you can buy the brgs, and use a press to assemble it.
SOURCE: how to assemble a ford expedition strut and spring
be very careful ,you need a coil spring compressor.parts store will let you use it if you buy the part there. then you compress the spring till theirs no tension on the top take the nut off .install the spring in the same locaction on the new strut tighten the nut. release compresor
SOURCE: how to install original factory fog lightson ford
hi when you purchased these they should have come with a wiring kit supplied, if not then you will have to go to ford and ask them for the wiring kit for them, on most replacement fog lights not ford made come complete with wiring included...hope this helps
SOURCE: Wiring diagram to install OEM 2010 Toyota Camry fog lghts
here is a link that can help you.
http://www.donmar.com/Tech/FogLight-TCA-303.pdf
SOURCE: which relay and where is it under the hood for a Ford Expedition 2000 fog lights
Best advice is to go to parts house and a Clinton manual on that particular model. It should contain all the wiring harnesses used on that model and don't make the mistake and think that the wiring harness is the same on all cars of that model. They usually have 5 or 6 different wiring harnesses.
Gillight
71 views
Usually answered in minutes!
×