SOURCE: need directions to fit towbar
there is a standard tow bar and a 2000kg for genuine tow bars
you need to remove both tail lights,the bumper bar and reinforcement bracket, spare wheel and exhaust hangars on rear mufflers, remove the tie down bracket on LHS chassis rail(dont need this or the bolts that hold it on), so you can then bolt in place either of the 2 tow bars.
genuine wiring patch harness for trailer plug is my suggestion since its plug straight into vehicle and interfaces with vehicle, goes in right hand rear compartment remove lid then remove box, interface connector for trailer harness is there.
instructions can be printed out from dealers if you ask
some new kits dont come with instructions in kits because information is on dealer computers
there is a template to print out to cut hole in bumper bar for tounge area of tow bar, uses centre square dimple in bar but its a bit wider.
SOURCE: where is drain plug for 2007 holden viva
You having a laugh mi ole china ,cars havent been fitted with rad drain plugs since the 60s ,,take the bottom hose off
SOURCE: How to fit towbar to holden captiva
As fitting a tow bar to the vehicle requires a modification plate to be fitted to keep it legal I suggest that you have the job done by accredited tow bar fitting specialists. They have the correct wiring loom and the plate to fix to the vehicle for the modification
SOURCE: any recall on front diff failure holden captiva?
Holden is a Aussie brand. Does the Australian gov have something like http://www.nhtsa.gov/ here in the US? I know GM does import some holden models.
SOURCE: Why won't my 2011 Holden Captiva fuel cap open?
I understand your problem. Your problem can easily be solved at http://toolsnyou.com/, It is an Online store,Who provide manuals of every repair.Do once go to the given link, http://toolsnyou.com/
429 views
Usually answered in minutes!
×