What is the specification torque for the big ends and cylinder head for nissan ak20

SOURCE: torque specifications for cylinder head

you need to be more specific...what make of vehicle you working on and engine size

Walker

• 146 Answers
• Posted on Jul 26, 2009

SOURCE: torque settings for cylinder head nissan sentra

Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

steve morris

• 1675 Answers
• Posted on Apr 07, 2010

SOURCE: whats the torque setting for big end bearing bolt

hi big end bearings are two stage, 25nm leave ten mins, then 49nm cylinder head bolts three stages 20nm leave ten mins, 40nm leave ten mins then 60nm check after 5,000miles hope this helps

SOURCE: what are torque specifications for toyota 3a-u

70 ft/lbs