SOURCE: Ford Aerostar shifter on the column
check under the dash where shift linkage connects to shift cable will be two #30 torx bolts which have probably worked loose you do not have to remove wheel easy fix
SOURCE: shifter won't shift gears
This happen to my aunts GMC yukon at I hop and the solution was a cable under the truck was disconnected and just needed to be reconnected.
SOURCE: 1998 chevy lumina, shifter on steering column,won't shift
Either the pin that connects rod to tranny is broken off, or there is internal transmission problems.
SOURCE: The manual transmission gear shift
take out the console, look on youtube for videos of others doing this. most likely you are going to need a saturn shifter bushing repair kit which you can get on ebay for less than 20 bucks.
SOURCE: loose column shifter
Look under dash where steering column is. Find the connection for the shift cable. see if the mount that the cable end connects to is loose. wiggle it. If it is there are 2 torx screws that mount the bracket to the shift tube that you need to tighten. I think they are a T-27 size bit. This is a common problem on fords. easy fix. I usually will take the screws out and use a thread locking compound in them to stop it from happening again.
377 views
Usually answered in minutes!
×