You need the right part on that Cutlass to make that Cutlass running man that's just like going to a doctor and say I need a heart transplant when it says all well I'll give you a heart transplant and then you wake up with a new liver and it's like I need a heart transplant and instead of a heart transplant you get a new liver then you're like I didn't ask for a liver well doesn't it all run the same
SOURCE: where do i locate the crank sensor on a 92 buick
the crank sensor is located behind the harmonic balancer and give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair Manual for your car wish you the best of luck michigan Man
SOURCE: crank pos sensor adjustment on 90 olds cutlass
You have got to space it by feel,so it does not touch either side of the reluctor plates,check the balancer reluctor plates to make sure they are not bent,and the balancer is not coming apart in the rubber part.
Testimonial: "helpful- will give a try.. Thanks."
SOURCE: 94' Cutlass Ciera S needs engine, have 92 Buick Century engine.
as long as they are the same size and type of motor the mounts will be the same as long as with the trans bolt pattern.
SOURCE: just replaced a crank sensor in 89 olds cutlass
It has to be put on where the two vanes do not touch the sensor. There is a tool for this, but you can align the sensor if you put the balancer almost on and look at it from the top with a light under it. Put it on just like tho old one came off. To use as reference point.
319 views
Usually answered in minutes!
×