SOURCE: How to dismantle back lamps in mini cooper 2008?
You have to open the hatch or trunk and maybe some plastic or carpet to get to the screws...
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589
SOURCE: AirBag Light on- 2002 Mini Cooper
ALL AIRBAG PARTS ARE DEALER ONLY ITEMS, SO NO U ARE STUCK. IF I KNEW A CHEAPER WAY I WOULD 100%SHARE THAT WITH U, BUT WHAT IS THE PART YOU NEED EXACTLY?
SOURCE: my service engine light came on on my 2003 mini
If the light was flashing when it came on, then it means your engine is misfiring.
A solid light can mean anything from a loose/faulty gas cap to a transmission issue.
This
light comes on when the computer detects a
fault of some sort in its diagnostic tests. If it keeps detecting this
issue, the light will remain on. If the light turns off, then it has
detected that the issue may no longer be present.
In
order to find out what the exact reason was for your light, You need to
have your car computer scanned to retrieve the code that
the computer would have stored when the light triggered. Most garages
will do this free of charge. The code will tell you what may have
caused the light to initially turn on.
SOURCE: I have a 2002 mini
This could be for several reasons. I believe that the mini cooper uses 2 02 sensors, so it's possible that you have a faulty second sensor.
Or you could have a broken or missing vacuum line or intake manifold leak.
The other possible causes are a bad engine temp sensor, when the temp sensor is malfunctioning the computer may increase or degrease the fuel supply, If you getting a decreased fuel supply on a cold engine then you would have a lean exhaust.I would suggest starting with the easy stuff first, you can use a can of carb cleaner to spray around the intake and on vacuum hoses to seem if the engine picks up and idle or decreases in idle. This will tell you if you have a vacuum leak on a hose of manifold.
IF you can find a leak then I would suggest locating the other 02 sensor and use a simulator on it also.
And lastly if this didn't fix it then a test of the coolant temp sensor and the engine temp sensor would be in order.
SOURCE: error code on 2008 mini cooper s of CCID 031 what
Hi. Error CCID 031 means increased emissions. You need to refer to yuor card dealer and have this ting replace. DTML - It is a little pump/sensor that measures fuel vapor emissions from fuel system. If your gas cap seal is faulty or you have any fuel system pressure leak this pump runs to maintain pressure in the system. Normally it is not supposed to run. When it runs it sets of the Check Engine light.
88 views
Usually answered in minutes!
×