Thise swt. needs to be replaced.
SOURCE: Is there a way to remove inertia fuel cutoff on a ranger?
It is an inertia switch, meaning that it works when there is a sudden change in inertia. The switch is closed by default and opens in an accident or rollover. You can easily remove this safety feature from your system by simply unhooking the connector and jumping across the 2 terminals with a piece of wire. But I strongly advise against this. This is a $50 dealer part that is easily replaced if it is bad. It is a great safety feature that may save your life.
SOURCE: Can you remove an inertia fuel cutoff switch on a 06 ranger?
Who cares if it is a safety system? my 05 won't even make it out of the driveway without the thing going off and killing my truck. All because I hit a pothole. If you know how, please tell us. I took it into the shop and the mechanic got 2 new switches from Ford and neither one fit. So either I am going to have spend another $1000 dollars because you have a moral stick up your you know what, or you could help us out.
SOURCE: 2001 ford f150 new fuel pump filter relay and
Yes it should be 12 volts at the pump. i have had this problem at the shop a couple of times and i replaced the inertia switch and it fixed it. Also check the connector at the inertia switch, there is high resistance in the circuit which is causing the voltage to be low.
SOURCE: 2000 monte carlo fuel pump reset switch location
I think the reset switch is in the trunk on that model,my Luminas was under the carpet on inside left
2,040 views
Usually answered in minutes!
×