25 amp fuse for AC/HTR in the fuse /relay block (or junction block) to a brown wire to control head.. Also a fusible link from junction block to heater/AC controls on a red wire, also at the control head.
Pull off the control unit so you can get to the electrical connector, then look for power on those two wires, with key in ON. This is how you start diagnosing the panel-see if it is getting proper power first, then test individual parts.
SOURCE: heater control panel won`t light up or control anything
there is a light behind the control panel. You need to find it and replace it.
121 views
Usually answered in minutes!
×